Truckwash TB 36

User friendliness, flexibility, efficiency and safety took centre stage in the development of the TB 36 commercial vehicle wash. This is a high-performance, 3-brush gantry with a maximum washing height of 3.60 metres and a washing width of 2.90 metres, which can also be reduced on site by up to 300 mm in height and up to 200 mm in width on request. This makes the system suitable for almost every type of vehicle - from small vans to buses, lorries and articulated lorries. The intuitive control panel, which can be operated wearing work gloves ensures simple operation. Low maintenance, washing programmes adapted to the degree of soiling and 2 pairs of photoelectric sensors ensure safe, economical and time-optimised operation at all times. The steel framework is hot-dip galvanised as standard, but is also available in a powder-coated variant on request (including primer in RAL 7012).Four steelwork heights are available. The steelwork gives the possibility to reduce the plant and wash height up to 300 mm in steps of 100 mm. Hereby the TB can be adjusted to individual conditions. The width of the TB can also be reduced up to 200 mm. The basic plant is hot-galvanised and can be powder-coated in OF 302 (RAL design card 7500) if requested. The electric cabinet is mounted on the right side and the water and media cabinet on the left side. Both high-quality plastic cabinets are easily accessible from the front. The gantries are standardly equipped with two pairs of light barriers for better contour detection and safety enhancement.

Specifications

Videos