Short-fibre microfibre hook-and-loop mop, 40 cm
Short-fibre microfibre hook-and-loop mop with hook-and-loop fastening for single-stage wiping on smooth and lightly structured hard floors. Suitable for the spray method and preconditioned applications.
The microfibre hook-and-loop mop was specially developed for cleaning applications in hygiene-sensitive areas, such as care facilities. It is made of high-quality materials and has a handy hook-and-loop fastening for simple attachment to and removal from the mop holder. Thanks to its short-fibre structure, the mop is ideal for cleaning smooth and lightly structured hard floors. The fine microfibres of the hook-and-loop mop not only offer well-balanced, effortless sliding properties, but also outstanding absorption of moisture and thus also dirt and dust. The wider edges at the sides of the short-fibre mop reliably remove loose dirt from nooks and corners. The 40 centimetre wide mop cover can be used both for the spray method and for preconditioned applications.
Specifications
Technical data
| Programme | ADVANCED |
| Floor type | Hard floors / Resilient floors |
| Floor structure | Smooth and lightly structured |
| Dirt level | Low to middle |
| Textile usage | Reusable textiles |
| Working width (cm) | 40 |
| Textile attachment | Hook&Loop |
| Material | 85% PET / 15% PA |
| Textile material | microfibre |
| Manufacturing type | Pile knitted fabric (Cleaning layer) |
| Textile structure | Loop pile |
| Washing temperature (°C) | max. 90 |
| Washing recommendation (°C) | 60 |
| Dryer temperature (°C) | max. 60 |
| Wash cycles* | approx. 250 |
| Quantity (Piece(s)) | 1 |
| Weight per product / Weight per m² (g/g/m²) | 95 / 440 |
| Dimensions (L × W) (mm) | 460 / 145 |
*Compliance with or use of recommended temperatures and detergents. In addition, the use of a dryer, especially at higher temperatures, may reduce the life considerably.
