Economical operation of gantry car washes

Keeping their vehicle clean is a high priority for many car owners. They therefore regularly visit sites where they can wash and carry out maintenance work on their vehicle. Consequently, gantry car washes can constitute a profitable side business for car workshops, service stations and car dealerships. Wash centres also benefit from the installation of cost-effective and environmentally-friendly systems.

A safe way to start in the wash system business

The profitable way to start in the wash system business

Gantry car washes can constitute a profitable cleaning solution for car workshops, car dealerships, car wash facilities and service stations. However, the wash system's size and equipment must be optimally adjusted to the target group and the number of vehicles being washed on a daily basis. If a gantry car wash is used as a contract business, a thorough site analysis must be carried out.

The first decision is whether the wash system should be used for the company's own purposes or as a contract business?

When purchasing a gantry car wash, one of the most important questions is of profitability. First of all, it must be established whether the gantry car wash is to be used exclusively for the company's own washing purposes or additionally as a contract business.

Cost-effectiveness of gantry car washes CCB3

For the company's own washing purposes

If it is to be used primarily for the company's own washing purposes, the size and technical design for car dealerships depend on the sales figures for new and used vehicles. Meanwhile, for car workshops, these factors depend on the number of customer vehicles passing through.

Tip: In both cases, the existing provision of third party facilities in the surrounding area must be taken into account when calculating profitability.

Cost-effectiveness of filling station gantry car washes

Contract cleaning

For contract cleaning, the profitability and the type of wash system selected initially depend on the expected number of vehicle washes. A thorough site analysis must be carried out to determine this.

Thorough site analysis for a profitable cleaning business

If a wash system is used as a contract business, a thorough analysis must be carried out in order to operate the system cost-effectively. In addition to choosing the right site, it is also vital to give close consideration to the structural and technical conditions, the financing options and also a profitability assessment in order to determine the optimal system size and its equipment.

1. Frequency of vehicles, infrastructure and competition

To estimate the number of vehicles passing through, it is first necessary to analyse the traffic frequency at the site, the infrastructure within a perimeter of ten kilometres and the regional competition.

Highly frequented sites are those located next to main roads, directly next to shopping centres or close to city or town centres. Consideration is also given to the number of inhabitants per square kilometre in the surrounding area, its social structure, as well as the number and type of registered cars in this area. The competent residential registry offices, licensing bodies and the motor transport authorities can provide this information.

However, the average number of vehicle washes per month determined from this information must not be equated to the maximum possible number of vehicle washes for a gantry. This figure is only a mean reference value which does not take account of peak times after periods of poor weather or clusters due to operational reasons.

Note:

Municipal groundwater and environmental protection laws have some bearing on how a wash system is used. For example, in many municipalities, it is not permitted to wash your car on the street so that the groundwater is not contaminated with washing substances. If such laws are tightly enforced by municipalities, it can be expected that an even higher number of vehicles will visit the gantry.

2. Structural and technical conditions – building permits, noise protection, water reclamation, etc.

The structural and technical conditions must then be examined on-site.

Power and water supply

For gantry car washes, there should be a sufficiently large hall with sufficient water supply and drainage, as well as an adequate power connection.

Consideration of safety regulations prescribed by trade associations

Before installing the wash system in an existing hall, it is also important to check whether the size of the hall size corresponds to the numerous safety regulations prescribed by trade associations (guidelines for vehicle wash systems ZH1/543).

New wash hall constructions

If a new wash hall is to be constructed, the costs are largely dependent on whether the building plot is already owned by the future operator and whether a commercial building permit is possible.

Noise protection

Irrespective of whether the hall already exists, if the wash system is adjacent to a residential area, consideration must also be given to noise protection regulations. An expert opinion must be requested, if necessary.

Selection and provision of suitable wash programmes

Gantry systems that can be operated all-year round receive a positive customer response if they offer special wash programmes, such as foam washes, hot wax treatments and underbody washes. For many customers, these programmes act as an incentive to use the wash system more frequently, particularly in winter and the transition period in spring.

Area around the gantry

The driveway space into the gantry car wash also plays an important role in its popularity, and therefore profitability. If the hall is easily accessible even for large SUVs and vans during peak times and without repeated manoeuvres, this has a positive impact on customer satisfaction and therefore visitor frequency.

There should also be an area around the gantry for carrying out preparatory and follow-up work. On the one hand, this opens up the possibility of additional lines of business, such as self-service washing stations, coin-operated vacuum cleaners and foot mat cleaning. On the other, these services also increase customer satisfaction and loyalty.

3. Calculation of maintenance costs

The maintenance costs should definitely not be overlooked when planning a wash system with respect to its amortisation. The price calculation for the wash programmes made available must be profitable in relation to the maintenance costs for the technology, the cost of the washing chemicals and staff wages. This calculation also includes the prewash costs, for example if a high-pressure cleaner is used in conjunction with cleaning agents.

4. Financing

Lastly, consideration must be given to the type of financing. In addition to the usual loans, there is generally also a leasing option for all moving wash system parts. Leasing can be a good alternative to purchasing, particularly if gantry parts are to be regularly upgraded, since less borrowed capital needs to be raised.

5. Reliable technology and factory service

When purchasing gantry car washes, operators should therefore also focus on the reliability of the technology. After all, the best wash system will not earn any money if it stops for several days due to a technical defect.

It is optimal if all of the electrical components meet the current safety requirements. Closed energy chains, water-resistant control elements and short circuit safety devices or emergency shutdowns are now a quality standard. In addition, the provision of professional manufacturer instructions, a comprehensive instruction manual and clearly arranged technical components helps to save costs.

The factory service is also important in this respect. Having customer service points across the country, service technicians who can be on-site within 24 hours and quick procurement of spare parts ensures minimal downtime and maintenance time. These services are rounded off by inspection and maintenance contracts, a hotline and the regular provision of information.

Suitable products for your area of application

CWB 3 Klean!Star iQ

CWB 3 Klean!Star

CB 3

Back to the overview